หมวดหมู่: ,


FA-1010D Series



Common Specifications

Bellofram Seal Type

Unlike the conventional U packing type, it uses a Bellofram
seal, as shown below. Because it does not generate sliding
resistance between the piston rod and the packing, the spring
power required to recover the piston rod can be reduced.
The Bellofram also acts as an accumulator based on its ability
to change shape. In principle, as long as the Bello is not
damaged, oil will never leak.

Precautions for Use

* Do not use this product without carefully reading the attached owner’s manual.
* Use with an external stopper.
* Ensure that sufficient mounting strength is secured for this product.
(As a guideline, it should be 2 to 3 times the maximum drag listed in the catalogue.)
* Do not turn the oil inlet screw located at the bottom of the main unit.
* 2 or more of this product can be used in parallel.
* Do not use this product in a vacuum or a location where it may come in contact with oil.
* Ensure that an eccentric load is not applied to the soft absorber.
(Allowable eccentric angle: within ±2.5°)

Notes on specifications / Adjusting method

Please peruse the operation manual carefully before use. Do not operate without sufficient mounting strength. Do not operate without an external stopper. Note that Products specification might be changed without notice.

ขณะนี้ท่านกำลังชมสินค้า FA-1010D2-C

รับชมสินค้าอื่นๆของยี่ห้อ Fuji Seiki



มาเป็นคนแรกที่วิจารณ์ “FA-1010D2-C”

อีเมลของคุณจะไม่แสดงให้คนอื่นเห็น ช่องข้อมูลจำเป็นถูกทำเครื่องหมาย *